Checking the level and adding fluid to the power steering reservoir (Chevrolet Cruze J300)

You will need: power steering fluid, a clean rag.

Note: Add Dexron II or Dexron III fluid recommended by the manufacturer to the power steering reservoir.

The tank is installed on the car body in the right part of the engine compartment.

Note: Check the power steering fluid level with the engine not running.

1. Turn the power steering reservoir cap counterclockwise...



2. ...and take it off.





3. Wipe the fluid level indicator on the power steering reservoir cap with a clean cloth and tighten the cap



4. Unscrew the power steering reservoir cap again. The working fluid level should be between the "MIN" and "MAX" marks.



5. If the working fluid level is approaching the "MIN" mark or below it, add working fluid.





6. Screw the cap back on and wipe away any liquid spills.