Removal and installation the microphone (Chevrolet Tahoe 2)

1. Remove the center console bezel.

2. Remove the cup holder.

3. Remove the console storage box.

4. Remove the rear and front console trim.

5. Move the driver's seat all the way forward.

6. Lift the seat trim panel (1) and remove the screw (2).



7. Move the driver's seat all the way back.



8. Loosen the screw.

9. Carefully, so as not to damage the microphone wire, disconnect the side panel of the console on the driver's side.

10. Disconnect the connector from the console side.

11. Disconnect the connector from the microphone (2).



12. Unscrew the two screws (1) and remove the microphone.

13. Install in the reverse order of removal.