Parking brake cable (Chevrolet Captiva 1)

Removal procedure

1. Release the parking brake lever.

2. Remove the parking brake/shift lever console cover. See section 9G, "Interior Trim".

3. Measure the length of the thread from the end of the rod to the nut and remove the nut.



4. Disconnect the parking brake cable ends from the parking brake cable equalizer and remove the parking brake cable equalizer.



5. Remove the parking brake cable from the rear wheel brake shield. See Part 4E. "Rear brakes".



6. Loosen the bolts securing the parking brake cable to the bottom.



7. Remove the parking brake cable.

Installation procedure

1. Install the parking brake cable to the rear wheel brake shield. See Part 4E. "Rear brakes".



2. Install the parking brake cable bracket mounting bolts to the underbody.

Tighten

Tighten the parking brake cable bracket-to-underbody bolts to 23 N·m (17 lb-ft).



3. Install the parking brake cable equalizer and secure the ends of the parking brake cable to the parking brake cable equalizer.





4. Install the parking brake adjusting nut onto the lever rod eye bolt and adjust the nut to the size it had before removal. See "Adjusting the Parking Brake - Rear Disc Brakes" in this section.

5. Install the parking brake console and gear shift lever cover. See section 9G, "Interior Trim".

(The text of the article was obtained from the website CHEVYMAN.RU)