Removal procedure
1. Open the hood.
2. Remove the nuts from the wiper arm to expose the wiper arm nut.
3. Lift the wiper arm assembly off the windshield and remove the wiper arm from the pivot shaft.
Installation procedure
1. Install the wiper arm.
Note: Direct contact of dissimilar metals can lead to rapid corrosion. Use proper fasteners to prevent premature corrosion.
2. Attach the wiper arm with the nut.
Tighten
Tighten the wiper arm nut to 22 Nm (16 lb-ft).
3. Turn on the windshield wipers and check that they are working properly.
4. Close the hood.