Home Aveo Captiva Cruze Lacetti Lanos Niva Tahoe Others

Captiva 1 (2006-2018)

The engine does not start — the crankshaft does not turn (Chevrolet Captiva 1)

Cause	Elimination
A component of the auxiliary drive system is seizing.	Remove the accessory drive belts. Turn the crankshaft manually by holding the pulley or flywheel.
The cylinder is hydraulically locked. Coolant/antifreeze has entered the cylinder There is oil in the cylinder Fuel got into the cylinder	Remove the spark plugs and check for fluid in them. Check if the cylinder head gasket is damaged. Carefully inspect the engine block or cylinder head for cracks. Check the fuel injector for deposits.
Seizure of the automatic transmission torque converter with the final drive assembly.	Loosen the torque converter bolts. Turn the crankshaft manually by holding the pulley or flywheel.
Seizure of a manual gearbox with the final drive assembly.	Disengage the clutch. Turn the crankshaft manually by holding the pulley or flywheel.
Broken timing belt and/or gear.	Inspect the timing belt and gears. Repair if necessary.
The crankshaft is seizing.	Inspect the crankshaft. Repair if necessary.
Foreign material in the cylinder. Broken valve Piston material Foreign material	Carefully inspect the cylinder for damaged components and/or foreign material. Repair or replace if necessary.
Seizure of the crankshaft or connecting rod bearings.	Carefully inspect the crankshaft and connecting rod bearings. Repair if necessary.
The connecting rod is deformed or destroyed.	Check the connecting rods. Repair if necessary.
The crankshaft is destroyed.	Inspect the crankshaft. Repair if necessary.

For details, visit the website: chevyman.ru

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Previous articles

Captiva 1: Troubleshooting

Next articles

Engine noise when starting
Initial ignition skip
Crankcase ventilation system — inspection and diagnostics
Oil Leak Diagnosis
Checking oil pressure

Coolant has entered the combustion chamber
Coolant has entered the engine oil
Diagnosing a drive belt for whistling noise during operation
Diagnosing a drive belt for squealing noise during operation
Diagnosing the drive belt for whining noise during operation

See similar articles on the topic of Chevrolet cars:
The engine will not start Chevrolet Aveo T300 (2012-2018)
The engine will not start Chevrolet Cruze 1 (2008-2016)
Engine start blocking circuit (immobilizer) Chevrolet Lacetti 1 (2002-2009)
Starting the engine from another car's battery (jump-starting) Chevrolet Lanos T150 (2002-2009)
Starting the engine Chevrolet Niva 1 (2002-2016)
Engine start inhibit switch seal Chevrolet Tahoe 2 and 3 (2000-2014)
Crankshaft Position Sensor (for 3.8L engine) Chevrolet Lumina 1 (1989-1994)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet

Captiva 1 (2006-2018)

🛡️ For your security and to improve our service, this site uses cookies. You can disable them in your browser.