Removal procedure
1. Disconnect the negative battery cable.
2. Disconnect the direct ignition connector (DIS).
3. Mark the position of the ignition wires and remove the ignition wires.
4. Unscrew the fastening bolts of the direct ignition system.
5. Remove the direct ignition system.
Installation procedure
1. Install the direct ignition system at the mounting location and install the mounting bolts.
Tighten
Tighten the fastening bolts of the direct ignition system to a torque of 10 Nm (89 lb-in).
2. Connect the direct ignition connector.
3. Install ignition wires.
4. Connect the negative battery cable.