Cadillac
1. Remove the two front seats.
2. Remove the right and left lower dashboard trim.
3. Remove the front trim of the center console.
- A) Using a screwdriver wrapped with protective tape, pry up the rear edge of the trim and release the rear clips.
- b) Disconnect electrical connectors.
- V) Pull trim (1) and take it off.
- G) Detach the fasteners from the front trim (2). Tightening torque 2 Nm.
4. Loosen the screws (1) console mounts.
5. Disconnect the console wiring connectors.
6. With the help of an assistant, remove the console from the vehicle.
7. Installation is carried out in the reverse order.
Except Cadillac
1. Remove the two front seats.
2. Remove the right and left lower dashboard trim.
3. Remove the front trim of the center console.
- A) Using a screwdriver wrapped with protective tape, pry up the rear edge of the trim and release the rear clips.
- b) Pull trim (1) and take it off.
- V) Detach the fasteners from the front trim (2).
4. Disconnect the console wiring connectors.
5. With the help of an assistant, remove the console (1) from the car.
6. Installation is carried out in the reverse order.