Removal procedure
Attention! Do not remove the intake air temperature sensor (IAT) from the air filter outlet hose. If it is necessary to replace the air filter outlet hose assembly, replace only with the intake air temperature sensor installed (IAT).
1. Disconnect the negative battery cable.
2. Disconnect the intake air temperature sensor connector (IAT).
3. Loosen both clamps on the air cleaner outlet hose and replace the air cleaner outlet hose assembly with the intake air temperature sensor installed (IAT).
Installation procedure
1. Install air filter outlet hose with intake air temperature sensor (IAT).
2. Connect the IAT sensor connector.
3. Connect the negative battery cable.