Combined mass air flow and intake air temperature sensor (Chevrolet Aveo T300)

The combined mass air flow and intake air temperature sensor is installed in the air hose between the air filter and the throttle body.



You will need a TORX T20 key.

1. Disconnect the wire from the negative terminal of the battery.



2. Slide the locking tab of the sensor wiring harness connector.



3. Squeeze the shoe retainer...





4. ...and disconnect it from the sensor.



5. Remove the two screws securing the sensor...



6. ...and remove it from the air duct.



7. Install the sensor in the reverse order of removal.