Upper B-pillar molding (Chevrolet Tahoe 2)

Removal

1. Disable the passive safety system.

2. Remove the lower center pillar molding.

3. Remove the cover (1) for access to the screw (2) for fastening the molding.



4. Loosen the screw (2). Tightening torque 2 Nm.

5. Remove the seat belt guide D-ring (3) from the belt height adjuster assembly.

6. Pull the molding inwards until the molding comes out of the clips (4).

Installation

7. Installation is carried out in reverse order.


The article was reprinted from the website «chevyman.ru»