Rear corner molding (Chevrolet Tahoe 2)

Right side

1. Disable the passive safety system.

2. Remove the rear door opening molding.

3. Remove the cover (1) for access to the screw (2) securing the corner molding (3).



4. Pull the molding out of the clips (4) and (5).

5. Disconnect the wiring connector.

6. Installation is carried out in reverse order.

Left side

1. Disable the passive safety system.

2. Remove the cargo door opening molding.

3. Pull the molding out of the clips.



4. Disconnect the wiring connector.

5. Installation is carried out in reverse order.


[The article is reprinted from the website: ChevyMan.ru]