Knee support — removal and installation (Chevrolet Tahoe 2)

Cadillac

1. Remove the parking brake release handle.

2. Remove the left side cover (1) of the instrument panel by pulling it out of the three retaining clips.



3. Loosen the two screws (2) securing the knee support. Tightening torque 2 Nm.

4. Release the knee support (3) from the four clips (4).

5. Remove the knee support.

6. Installation is carried out in reverse order.

Besides Cadillac

1. Remove the parking brake release handle.

2. Remove the left side instrument panel cover by pulling it out of the three retaining clips.



3. Loosen the two screws (1) securing the knee support. Tightening torque 2 Nm.

4. Release the knee support (2) from the four clips (3).



5. Remove the knee support.

6. Installation is carried out in reverse order.

(Information taken from the official website ChevyMan.ru)