You will need: keys «on 10», «at 13», «at 15», a special plastic mounting spatula or a flat-bladed screwdriver.
1. Remove the battery and its mounting shelf (see «Removal and installation of the shelf of fastening of the rechargeable battery»).
2. Remove the crankcase protection (see «Removal and installation of mudguards and engine crankcase protection»).
3. Install a jack or support under the gearbox housing.
4. Turn out two bolts...
5.... and unscrew the nut securing the support to the side member of the body.
6. Turn out three bolts of fastening of a support to an arm on a transmission...
7.... and remove the support.
8. Inspect the support pad. If there is swelling, cracking of the rubber mass, its delamination from the metal cage, or cracks in the cage, replace the support assembly.
9. Install the left powertrain mount in the reverse order of removal.