You will need: socket head «at 13», flat blade screwdriver.
The battery mounting shelf is removed for replacement if it is damaged and to gain access to other components and assemblies of the vehicle.
1. Remove the battery (see «Removing and installing the battery»).
2. Pry off the engine harness holder and disconnect the holder from the battery tray bracket.
3. Similarly disconnect from the shelf the second holder of a motor plait of wires.
4. Pry off the holder «mass» wires and disconnect the holder from the battery shelf bracket.
5. Remove the second holder from the shelf in the same way «mass» wires.
6. Turn out three bolts of fastening of the shelf of the rechargeable battery.
7. Pull the shelf away from the bracket.
8. Release the latch and disconnect the non-contact discharge current sensor from the battery shelf, then remove the shelf.
9. Install the parts in the reverse order of removal.