Removal and installation the audio system amplifier (Chevrolet Tahoe 2)

Cadillac

1. Remove the center console bezel.

2. Remove the lower center instrument panel trim.

3. Loosen the bolts (1). Tightening torque 2 Nm.



4. Pull out the rear passenger cup holders.

5. Loosen the screws (2). Tightening torque 2 Nm.

6. Move the seats to gain access to the console mounting screws.

7. Loosen the screws (3). Tightening torque 9 Nm.

8. Raise the console.

9. Loosen the amplifier mounting screws (4). Tightening torque 9 Nm.

10. Disconnect the connectors.

11. Remove the audio amplifier (5).

Note: After installing the audio amplifier, please perform the authorization procedure.

12. Install in the reverse order of removal.

Besides Cadillac

1. Loosen the console mounting screws (1). Tightening torque 9 Nm.



2. Remove the console (2).



3. Loosen the bracket mounting screws (3). Tightening torque 9 Nm.

4. Remove the bracket (4).

5. Loosen the amplifier mounting screws (5). Tightening torque 9 Nm.

6. Disconnect the connector.

7. Remove the audio amplifier (6).

Note: After installing the audio amplifier, please perform the authorization procedure.

8. Install in the reverse order of removal.