Tahoe, Avalanche
1. Remove fender liner.
2. Detach the clips (2).
3. Detach the retainer (3).
4. Disconnect the connector (1).
5. Remove the fog lamp (4).
6. Install in the reverse order of removal.
7. Adjust fog lights.
Yukon
1. Remove fender liner.
2. Detach the clips (2).
3. Detach the retainer (3).
4. Disconnect the connector (1).
5. Remove the fog lamp (4).
6. Install in the reverse order of removal.
7. Adjust fog lights.
Escalade
1. Remove the lower finishing of a bumper.
2. Disconnect the connectors.
3. Loosen the nuts (1).
4. Remove the fog lamp (2).
5. Rotate chucks (4) counterclockwise and remove them.
6. Remove the fog light bulb (3) and a parking light / turn signal lamp (5).
7. Install in the reverse order of removal.
8. Adjust fog lights.