License plate lights mounted on the trunk lid (sedan) or tailgate (hatchback) at the top of the license plate niche.
1. Disconnect the wire from the terminal «minus» battery.
2. Press the lamp housing in the direction of the arrow. In this case, the retaining protrusion on the lamp housing will disengage from the edge of the hole in the trunk lid trim.
NOTE: This is how fastening elements are located on the body of the license plate light: A - retaining protrusion; B - elastic retainer.
3. Remove the light from the hole in the trim.
4. Turn the lamp socket counterclockwise, disconnect it from the lamp body and remove the lamp.
5. Install the license plate light in the reverse order of removal.
6. Similarly replace the second lantern.