Contents: Removal procedure ↧ Installation procedure ↧
Removal procedure
1. Raise and support the vehicle.
2. Loosen the stabilizer bar clamp bolts.
3. Remove the nut securing the stabilizer bar to the stabilizer rod.
Important: When disconnecting the stabilizer link, hold it with a wrench to prevent it from turning.
4. Remove the nut securing the stabilizer bar to the lower suspension arm.
5. Remove the stabilizer bar from the vehicle.
Installation procedure
1. Place the stabilizer bar through the lower control arm.
Important: When connecting the stabilizer bar, hold it with a wrench to prevent it from turning.
2. Install the stabilizer bar strut mounting nut to the suspension arm.
Tighten
Tighten the nut to a torque of 15 Nm (11 ft·lbs).
3. Install the stabilizer bar mount nut to the stabilizer bar.
Tighten
Tighten the nut to a torque of 57 N·m (42 ft·lbs).
4. Install the stabilizer bar clamp bolts.
Tighten
Tighten the bolts to a torque of 70 Nm (52 ft·lbs).
5. Lower the car.
[Original version of the article on the website chevyman.ru]