Contents: Removal procedure ↧ Installation procedure ↧
Removal procedure
1. Raise and support the vehicle.
2. Remove the nut securing the stabilizer bar to the stabilizer rod.
3. Remove the stabilizer bar clamp bolts.
4. Disconnect the stabilizer bar from the stabilizer strut ball joints while simultaneously removing the stabilizer bar from the vehicle.
Installation procedure
1. Bring the stabilizer into the car, while simultaneously bringing the struts to the stabilizer bar.
2. Install the stabilizer bar clamp bolts.
Tighten
Tighten the bolts to a torque of 70 Nm (52 ft·lbs).
3. Install the stabilizer bar mount nut to the stabilizer bar.
Tighten
Tighten the nut to a torque of 57 N·m (42 ft·lbs).
4. Lower the car.
(The original source of the article is the website: chevyman.ru)