Withdrawal procedure
1. Raise and place the vehicle on stands.
2. Remove the lower shock absorber mounting bolt.
3. Remove the upper shock absorber mounting bolt.
4. Remove the shock absorber from the vehicle.
Installation order
1. Install the shock absorber on the car.
2. Install the upper shock absorber mounting bolt.
Tighten
Tighten the bolt until a torque of 110 Nm is reached (81 lb-ft).
3. Install the lower shock absorber mounting bolt.
Tighten
Tighten the bolt until a torque of 110 Nm is reached (81 lb-ft).
4. Lower the car.