Air filter element (Chevrolet Captiva 1)

Contents: Removal procedure ↧ Installation procedure ↧

Removal procedure

1. Loosen the clamp and disconnect the air cleaner outlet hose from the air cleaner housing.

2. Loosen the air filter element cover screws.

3. Remove the air filter element.

Installation procedure

1. Install the air filter element cover.

2. Tighten the air cleaner element cover screws.

Tighten

Tighten the air cleaner element cover screws to 2 N·m (18 lb-in.).

Tighten the air cleaner element cover screws to 2 N·m (18 lb-in.).

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Captiva 1: Engine repair

Air cleaner unit
Decorative engine cover
Table of special tools

Auxiliary drive belt
Idle pulley of the auxiliary drive belt
Accessory Drive Belt Tensioner Assembly
Upper intake manifold
Intake manifold assembly

See similar articles on the topic of Chevrolet cars:
Replacing the air filter element Chevrolet Aveo T300 (2012-2018)
Replacing the air filter element Chevrolet Cruze 1 (2008-2016)
Replacing the air filter element Chevrolet Lacetti 1 (2002-2009)
Replacing the air filter element Chevrolet Lanos T150 (2002-2009)
Air filter filter element Chevrolet Tahoe 2 and 3 (2000-2014)
Cleaning and replacing the air filter element Chevrolet Orlando 1 (2010-2018)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet

Captiva 1 (2006-2018)