Removal procedure
1. Loosen the clamp and disconnect the flexible intake air duct from the mass air flow sensor (MAF).
2. Loosen the clamp and disconnect the intake duct from the throttle body.
3. Disconnect the retainer and disconnect the positive crankcase ventilation hose (PCV) from the intake duct.
4. Remove the air intake duct assembly.
5. Remove the bolts and nuts securing the decorative engine cover.
6. Remove the decorative engine cover.
Installation procedure
1. Install the decorative engine cover.
Tighten
Tighten the bolts and nuts securing the decorative engine cover to 8 Nm (71 lb-in.).
2. Install the air intake duct assembly.
3. Fasten loose clamps.