2. Unscrew the nuts and remove the earrings (see illustration).
4.2. Unscrew the nuts and disconnect the earrings from the stabilizer
Caution: Do not pry the earrings when removing them, otherwise their covers may be damaged.
Note: Do not mix parts removed from the left and right side of the vehicle.
3. Unscrew the stabilizer clamp bolts (see illustration).
4.3. Unscrew the clamp bolts and remove the anti-roll bar from the vehicle
4. Remove the anti-roll bar.
5. Remove the rubber bushings, marking the original location of the slots.
6. Inspect all parts for signs of wear or damage.
7. Installation is carried out in the reverse order of removal. Tighten all fasteners to the required torques.
(The original article is on the website «chevyman»)