2. To perform this procedure, it is necessary to use a puller, which grips the bearing from behind.
8.2. Typical impact device with attached puller for axle bearing
3. Attach the puller to the air impact tool and remove the bearing from the axle housing (see illustration).
8.3. Removing the axle shaft bearing using an impact tool
4. Clean the seat and install the new bearing using a special tool or a piece of pipe that should be brought into contact with the outer race of the bearing (see illustration). Insert the bearing to the full depth of the seat.
8.4 Using a special mandrel or a large diameter socket head, evenly insert the bearing into the axle housing
5. Install a new oil seal (see subsection 7), then install the axle shaft (see subsection 6).
(Original version of the article on the website: «CHEVYMAN.ru»)