Oil filter (Chevrolet Captiva 1)

Removal/installation procedure

Important: When changing the engine oil, reset the engine oil service before changing using a diagnostic tool.

1. Remove the lower engine shield. Follow section 9N, Frame and Underbody.

2. Drain the engine oil.

3. Remove the oil pan. Follow step "Oil pan" in this section.



4. Remove the coarse oil filter with washer.

Tighten

Tighten the coarse oil filter bolt to 11 Nm (97.4 lbs.in).

Tighten the coarse oil filter bracket bolt (outer support plate bolt) up to 35 Nm (25.8 ft·lbs).