|
STATE
|
Probable cause
|
Elimination
|
|
Exhaust gas leak
|
Leaks at pipe connections.
|
Tightening nuts and bolts to the specified torque.
|
|
Damaged or improperly installed catalytic converter O-rings/gaskets.
|
Replace the O-ring/gasket if necessary.
|
|
|
Burnt or rusted exhaust pipe or muffler.
|
Replace the component if necessary.
|
|
|
Exhaust noises
|
Leaks in the manifold or pipe connections.
|
Tighten the bolts/nuts in the gaps on the connections to the specified torque. Replace the gasket if necessary.
|
|
Burnt or porous exhaust pipe or muffler.
|
If necessary, replace the pipe/muffler assembly.
|
|
|
The exhaust manifold is cracked or broken.
|
Replace the manifold.
|
|
|
Leak between manifold and cylinder head.
|
Tighten the manifold mounting studs to the cylinder head to the specified torque.
|
|
|
Loss of engine power, misfires, fluctuations in engine speed, high fuel consumption, engine stalling or difficult starting
|
Clogged catalytic converter (may cause serious engine malfunction).
|
Replace the catalytic converter.
|
|
Crumpled pipeline.
|
Replace the pipeline.
|
|
|
Internal rattling in the muffler
|
Broken pipes and/or partitions in the muffler.
|
Replace the muffler.
|
|
The catalytic converter was destroyed and its parts ended up in the muffler.
|
Replace the catalytic converter assembly and the damaged muffler.
|
|
|
Exhaust system rattle or knock
|
Damaged, worn, missing or incorrectly installed rubber mounting hangers.
|
Check and replace if necessary.
|
|
Damaged mounting hooks or hangers.
|
Perform maintenance/replace hangers or hooks as necessary.
|
|
|
Incorrect alignment.
|
Tighten all clamps according to the tightening sequence and specified torque.
|
|
|
Damaged or incorrect exhaust system components.
|
Replace damaged or non-compliant exhaust system components.
|
(The original source of the article is the website: «CHEVYMAN»)
