2. Remove the left front wheel.
3. Remove the left front fender liner.
4. Disconnect the washer hoses (1, 2) and detach the clamps.
5. Drain the fluid from the washer reservoir.
6. Disconnect the connectors.
7. Open the hood.
8. Remove the washer reservoir cap.
9. Remove the auxiliary battery bracket (if equipped).
10. Unscrew the upper bolt securing the washer reservoir (under the bracket of the additional battery).
11. Loosen the two mounting bolts (1) and remove the washer reservoir (2). Tightening torque 9 Nm.
Note: Remove the washer reservoir from below, through the wheel arch.
12. Install in the reverse order of removal.
The original article can be found on the resource ChevyMan.ru