Removal and installation the rear window wiper arm (Chevrolet Tahoe 2)

1. Lift the protective cap (1).



2. Unscrew the nut (2). Tightening torque 9 Nm.

Note: When tightening the nut, hold the lever in the extreme position.

3. Turn the washer hose (3) counterclockwise.

4. Remove the lever (4).

5. Unscrew the nut (5). Tightening torque 5 Nm.

Note: Tighten the nut before installing the lever.

6. Remove the gasket (6).

7. Install in the reverse order of removal.

The article is reprinted from the website: «ChevyMan»