2. Remove the steering wheel (see chapter 10, section 21).
3. Remove the turn signal switch (see section 8).
4. Make sure the key is removed from the ignition switch.
5. Using pliers, remove the horn switch (see illustration).
9.5 Using pliers, remove the horn switch and clamp
6. Insert the key and turn the lock cylinder to the "Lock" position.
7. Loosen the ignition lock cylinder mounting screw (see illustration).
9.7. The lock cylinder is secured with a bolt with a Torx head (indicated by the arrow)
8. Remove the lock cylinder.
9. Installation of the ignition lock cylinder is carried out in the reverse order.