8.1 Steering wheel and steering column controls
Multi-function lever
2. This lever A is used to control the turn signals, windshield wipers, cruise control, and low and high beam headlights.
Sound signal
3. To sound a sound signal, press the steering wheel hub at points B, where a conventional image of a sound signal is applied.
Hazard light switch
4. If you press the hazard warning light switch button C, the front and rear turn signals will flash. This switch operates regardless of the position of the key in the ignition switch, and even when the key is removed from the ignition switch. To turn off the hazard warning lights, press the switch again. When the hazard warning lights are on, the turn signals do not work.
Steering wheel height adjustment lever
5. You can adjust the tilt of the steering wheel to one of several possible positions. To adjust the steering wheel tilt, pull lever D. Set the steering wheel to the desired position and release the lever
Warning: Do not adjust the steering wheel while the vehicle is moving. Do not use the highest steering wheel position to control the vehicle. When the steering wheel is in this position, the airbag cannot effectively perform its protective function. It is recommended to use the highest possible steering wheel position only to make it easier to get in and out of the vehicle.
Driver Information Center Buttons (optional equipment)
6. The driver information center allows you to obtain information about the status of many vehicle systems.
7. Control buttons G are located on the steering wheel. The information center display is located at the bottom of the instrument panel. See _ subsection «Driver Information Center» higher.
Accelerator and service brake pedal position regulator (optional equipment)
8. If the car is equipped with adjustable accelerator and service brake pedals, then the H regulator is located on the steering column.