Rear bumper reinforcement (Chevrolet Tahoe 2)

Removal

1. Remove the rear bumper trim panel.

2. Unscrew the four bolts (1) of the bumper reinforcement. Tightening torque 70 Nm.



3. Unscrew the six bolts (2) of the bumper reinforcement. Tightening torque 100 Nm.

4. Disconnect the wiring connectors from the amplifier.

5. Remove the amplifier.

Installation

6. Installation is carried out in reverse order.


(The original article can be found on the resource: «ChevyMan»)