2. Pull out the headlight housing clips (see illustration). Remove the parking light/turn signal lamp socket from the headlight housing (see illustration). When performing this procedure on a Chevrolet or GMC vehicle, you will also need to remove the parking light socket.
16.2a. Pull out the headlight housing latches...
16.2b....then remove the cover and disconnect the sockets and connectors (not all connectors are visible from this angle)
3. Disconnect the electrical connector. Pull the headlight housing out of the body panel.
4. Installation is carried out in the reverse order of removal. Align the headlight housing locating pins with the holes in the panel and press the tabs down to secure the housing in its original location.