Front seat belt height adjuster (Chevrolet Captiva 1)

Contents: Removal procedure ↧ Installation procedure ↧

Removal procedure

1. Remove the upper center pillar trim molding. See Section 9G, Interior Trim.

2. Remove the bolts and remove the seat belt height adjuster.

Installation procedure

Note: Direct contact of dissimilar metals may result in rapid corrosion. Use proper fasteners to avoid premature corrosion.

1. Secure the seat belt height adjuster with bolts.

Tighten

Tighten the front belt height adjuster bolts to 38 N·m (28 ft·lbs).

2. Install the upper center pillar trim molding. See Section 9G, Interior Trim.

(The original article can be found on the resource: CHEVYMAN.RU)

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Captiva 1: Seat belts

Three-point front seat belt with emergency locking retractor (ELR)
Driver's seat belt alarm malfunction
Schematic and assembly diagrams of seat belts
General description and operation of seat belts

Three-point rear seat belt with emergency locking retractor (ELR)
Second three-point seat belt for the rear seat with emergency locking retractor (ELR) mechanism
Front seat belt buckle with tensioner
Left and center lock or seat belt for rear seat (folding seat)
Left and center seat belt buckle for rear seat (double folding seat)