Removal procedure
1. Disconnect the negative battery cable.
2. Remove the decorative panel of the audio system. See section 9F, "Audio systems".
3. Loosen the fixing screws of the control unit.
4. Pull the knot out to gain access to the back.
5. Disconnect electrical connectors.
6. Remove air intake pipe.
7. Remove the automatic temperature control unit.
Installation procedure
1. Connect the air intake pipe.
2. Attach electrical connectors.
3. Install the automatic temperature control unit and tighten the fixing screws.
Tighten
Tighten the fixing screws of the control unit with a torque of 2.5 Nm (22 lb-in).
4. Install the audio trim panel. See section 9F, "Audio systems".
5. Connect the negative battery cable.