Removal procedure
1. Disconnect the negative battery cable.
2. Remove the instrument panel. See section 9E, "Instruments/driver information system".
3. Remove the drive stem by releasing it from the lever using needle nose pliers.
4. Remove drive lever.
5. Disconnect electrical connector.
6. Loosen the motor fixing screws.
7. Remove electric motor.
Installation procedure
1. Install electric motor.
2. Install motor mounting bolts and tighten.
3. Install drive lever.
4. Install drive shaft.
5. Connect the electrical connector.
6. Reinstall the instrument panel. See section 9E, "Instruments/driver information system".
7. Connect the negative battery cable.