Disassembling the rear crankcase (Chevrolet Captiva 1)

1. Remove the feed pipe to the underdrive clutch (C3).

• Remove 4 bolts and 2 clamps from the rear crankcase.

• Use a screwdriver to remove the feed pipe to the downshift clutch (C3).

Important: Care must be taken not to damage the C3 feed pipe and rear crankcase.

2. Remove the thrust bearing race and sealing ring.

• Remove the thrust bearing race from the rear crankcase.
• Remove 3 sealing rings from the rear crankcase.

3. Remove the forward clutch accumulator (C1).

• Remove 2 Torx bolts and remove the battery cover.
• Remove the battery piston, spring, O-ring and O-ring from the battery cover.

(The original article is on the website: «ChevyMan.ru»)