Necessary equipment
- DT-48074 Input and output shaft seal installer
- J-8092 Guide handle
- J-26941 Bushing and bearing puller
- J-45124 Demolition Bridge
Withdrawal procedure
Important: Do not use a screwdriver or chisel to remove the seal. Using a screwdriver or chisel to remove the seal may damage the sealing surface of the aluminum crankcase.
1. Using the J-45124 removal bridge and J-26941 bushing and bearing remover, remove the left transfer case input shaft seal.
Installation order
1. Using the input and output shaft seal installer DT-48074 and the guide handle J-8092, install the left seal (1) transfer case input shaft.