Door opening limiter (Chevrolet Tahoe 2)

Removal

1. Open the door.

2. Remove the door trim panel.

3. Remove the door seal.

4. Loosen the limiter mounting bolt to the body. Tightening torque 25 Nm.



5. Remove the plug from the access hole to the door stop nut in the door frame.

6. Unscrew the nut securing the limiter to the door. Tightening torque 9 Nm.

7. Remove the limiter.

Installation

8. Installation is carried out in reverse order.


[The original article can be found on the resource «chevyman.ru»]