Front bumper trim panel (Chevrolet Tahoe 2)

Removal

1. (Only Escalade) Remove the upper radiator air damper.

2. Remove the front wheel arch liners.

3. Unscrew the 4 bolts (1) of the front wing bracket. Tightening torque 7 Nm.

4. Unscrew the two bolts (2) securing the trim panel to the bumper reinforcement. Tightening torque 10 Nm.

5. Unscrew the six bolts (3) securing the trim panel to the radiator support. Tightening torque 6 Nm.

6. Disconnect the fog light wiring connectors.

7. Remove the trim panel (4) of the front bumper.

Installation

8. Installation is carried out in reverse order.