Removal and installation the windshield wiper drive rod (Chevrolet Tahoe 2)

1. Remove the windshield wiper arms.

2. Remove the ventilation grille.

3. Loosen the four bolts and remove the spacer. Tightening torque 9 Nm.



4. Disconnect the connector from the electric motor.



5. Loosen the two bolts and remove the windshield wiper drive rod. Tightening torque 9 N·m.



6. Disconnect the rod from the electric motor.





7. Loosen the two bolts and remove the electric motor. Tightening torque 8 Nm.



8. Install in the reverse order of removal.

The original article is on the website «chevyman.ru»