Attention: before carrying out repair work, turn the ignition switch to the position "OFF" or "LOCK" and turn off all electrical loads, except when necessary for repair work. If tools or fixtures during repair work can come into contact with electrical contacts, you should also disconnect the wire from the negative terminal of the battery. Violation of these requirements may result in injury, damage to the vehicle or vehicle systems.
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove the knee brace.
3. Disconnect the brown connector.
4. Disconnect the rest of the connectors (1).
5. Remove the electrical control unit from the bracket.
6. Install in the reverse order of removal.