Windshield wiper motor control circuit (Chevrolet Tahoe 2)

1. Turn the ignition switch to the "OFF" position.

2. Remove the ventilation grille.

3. Unlock the connector and disconnect it.

4. Unscrew the three screws (1) and remove the cover (5) from the electric motor (2).



5. Check the condition of the sealant on the cover. If necessary, replace the sealant with a new one.

6. Carefully remove the control circuit (4) from the motor housing, holding the circuit by the connector (3).

7. Install in the reverse order of removal.