Lighting fixtures (Chevrolet Aveo T250)

Technical characteristics of front lighting lamps

Name of the lamp	Quantity	Power
1. Low beam/high beam (halogen)	2	60/55 W
2. Parking light	2	5 W
3. Direction indicator	2	21 W
4. Fog lights (halogen)	2	55 W
5. Side repeaters turn signals	2	5 W

Technical characteristics of rear lighting lamps

Name of the lamp	Quantity	Power
1. Direction indicator	2	21 W
2. Brake light	2	21 W
3. Fog lights	2	21 W
4. Reversing light	2	21 W
5. Rear side light	2	21/5 W
6. Central brake light	5	5 W
7. License plate light	2	5 W

Technical characteristics of interior lighting lamps

Name of the lamp	Quantity	Power
Central interior light	1	10 W
Luggage compartment light	1	10 W

Replacing headlight bulbs

Loosen the mounting screws and remove the headlight assembly. Disconnect the connector and remove the cover. Remove the spring and replace the burnt-out bulb with a new one. Assemble in reverse order.

Replacing parking light bulbs

Loosen the mounting screws and remove the headlight assembly. Disconnect the connector and remove the cover. Remove the lamp holder and replace the burnt-out lamp with a new one. Assemble in reverse order.

Replacing front turn signal bulbs

Loosen the mounting screws and remove the headlight assembly. Remove the turn signal bulb socket by turning it counterclockwise. Remove the bulb from the socket by turning it counterclockwise. Install a new bulb in the socket by turning it clockwise. Assemble in the reverse order.

Replacing side turn signal repeater bulbs

Press down on the turn signal unit and pull it out as a whole. Remove the turn signal bulb socket by turning it counterclockwise. Remove the bulb from the socket by turning it counterclockwise. Install a new bulb in the socket by turning it clockwise. Reassemble in the reverse order.

Replacing the rear light bulbs

Loosen the screws and remove the headlight assembly. Remove the socket of the desired bulb by turning it counterclockwise. Remove the bulb from the socket by turning it counterclockwise. Install the new bulb in the socket by turning it clockwise. Assemble in the reverse order.

Replacing the central brake light bulb

Loosen the mounting screws and remove the brake light assembly, disconnect the connector. Loosen the screws and remove the reflector unit. Replace the burnt-out bulb with a new one. Assemble in reverse order.

Replacing the license plate light bulb

Loosen the mounting screws and remove the lamp cover. Remove the lamp holder by turning it clockwise. Replace the burnt-out lamp with a new one. Assemble in the reverse order.

Replacing the central interior light bulb

Remove the lamp shade using a flat-head screwdriver. Replace the burnt-out bulb with a new one. Install the shade.

Replacing the luggage compartment light bulb

Remove the lamp shade using a flat-head screwdriver. Replace the burnt-out bulb with a new one. Install the shade.