Removal and installation trunk trims (Chevrolet Aveo T300)

You will need: a 10 mm wrench, flat-head and Phillips-head screwdrivers.



1. Pull out the cores of the four pins securing the rear trim panel of the trunk.



2. Remove the pistons...



3. ...and remove the rear trunk trim.

4. Fold down the rear seatback (see "Back seat").



5. Remove the four pins securing the left side trim of the trunk.





6. Unscrew the rear luggage loop mounting bolt and remove the loop.



7. Remove the front luggage loop in the same way.



8. Disconnect the front edge of the left trunk trim from the lower rear pillar trim and remove the left trunk trim.

9. Remove the right trunk trim in the same way.

10. Install the trunk trims in the reverse order of removal.