2. Perform decompression, remove the fuel tank (see below).
3. The fuel pump is mounted in the tank.
4. Carefully, using light blows of a hammer on the copper (not steel!) beard, turn the ring nut counterclockwise (see photo).
5. Carefully remove the pump together with the sensor from the tank.
Caution! Do not allow the sensor float to collide with the edge of the tank when removing the pump, as this may disrupt the normal operation of the sensor.
6. Remove the fuel pump by pushing the pump into the rubber sleeve and removing it from the runners.
7. Installation of the new pump is carried out in reverse order.