Note: When adding brake fluid to the master cylinder reservoir, use only Delco Supreme 11 or equivalent (DOT-3) fluid from a clean, sealed container.
1. Check the brake fluid level in the master cylinder reservoir.
2. If the brake fluid level is below the midpoint of the regular level checks, perform a brake system check, see above.
3. If the system check shows no noticeable damage or the necessary repairs have been made, top up the brake fluid to the maximum level.
4. If the brake fluid level is above the midpoint of the regular level checks, it is not recommended to add fluid.
The material was created based on information from the website: «ChevyMan»