Home Aveo Captiva Cruze Lacetti Lanos Niva Tahoe Others

Tahoe 2 and 3 (2000-2014) Tahoe 1 (1992-2000)

Brake pedal — removal and installation (Chevrolet Tahoe 2)

1. Remove the clip (4) securing the brake pedal pusher.

1. Remove the clip (4) securing the brake pedal pusher.

2. Remove the brake light switch (2) and pusher (3) from the brake pedal stud (1).

3. Loosen the brake pedal axle bolt nut. Tightening torque 47 Nm.

3. Loosen the brake pedal axle bolt nut. Tightening torque 47 Nm.

4. Remove the brake pedal axle bolt.

5. Remove the brake pedal.

6. Installation is carried out in reverse order.

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Previous articles

Tahoe 2 and 3: Brake system

Next articles

Brake fluid level sensor
Master brake cylinder
Brake master cylinder reservoir
Filling the master brake cylinder reservoir
Checking the brake pedal pusher

Vacuum brake booster
Brake booster check valve and hose
Hydraulic brake booster
Hydraulic brake booster accumulator
Brake pipes — replacement

See similar articles on the topic of Chevrolet cars:
Checking the brake pedal position Chevrolet Aveo T300 (2012-2018)
Brake pedal — removal and installation Chevrolet Captiva 1 (2006-2018)
Removal and installation the brake pedal Chevrolet Cruze 1 (2008-2016)
Checking the fluid level in the brake and clutch hydraulic reservoir Chevrolet Lacetti 1 (2002-2009)
Replacing fluid in hydraulic brake and clutch drives Chevrolet Lanos T150 (2002-2009)
Clutch and brake pedal bracket Chevrolet Niva 1 (2002-2016)
Brake pedal travel — check Chevrolet Trailblazer 1 (2001-2008, petrol)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet

Tahoe 2 and 3 (2000-2014)

🛡️ For your security and to improve our service, this site uses cookies. You can disable them in your browser.