Removal and installation the heater electric fan resistor (Chevrolet Aveo T300)

You will need: 5.5" and 7" socket heads.

1. Disconnect the wire from the negative terminal of the battery.



2. Remove the three screws securing the right decorative panel of the instrument panel...

NOTE: This is the location of the screws that secure the right instrument panel trim panel.

3. ...and remove the shield.





4. Press the lock of the heater electric fan resistor wiring harness connector...



5. ...and disconnect the connector.



6. Remove the two screws securing the resistor...



7. ...and remove it from the climate control unit housing.





8. Install the heater electric fan resistor and all removed parts in the reverse order of removal.

(The article is based on data from the website ChevyMan.ru)