The vehicle is equipped with inertia reel seat belts for the driver and front passenger.
The same belts are installed for rear seat passengers.
USEFUL TIPS: Check the condition of the belts regularly. If you find any fraying, tears or other damage on the belts, be sure to replace the belts. If the belts are dirty, wash them with a mild soap solution. When transporting cargo on the back seat, you can use the seat belts to prevent it from moving.
WARNINGS: Never iron the belts. Do not fasten the belt to a child sitting on the passenger's lap.
Be sure to replace belts that have been subjected to critical stress in a traffic accident.
To fasten the belt, pull it out of the reel...
...and insert the buckle tongue into the lock until it clicks, without allowing the straps to twist.
To unfasten the belt, press the lock button while holding the belt. Release the belt - it will automatically wind onto the reel.
The vehicle also features height adjustment for the front seat belts. To adjust the position of the belt, lower or raise the belt mount so that the belt does not touch your neck or put pressure on your shoulder.
To move the mount vertically downwards, press and hold the latch.
There is no need to hold the lock to move the belt mount upward.
NOTE: After completing the adjustment, make sure that the belt holder is fixed in one of the positions provided by the design. To do this, without pressing the lock, pull the belt down: if it was not fixed, it will move down to the nearest fixed position.