Lower cargo door lock (Chevrolet Tahoe 2)

Removal

1. Loosen the bolts securing the lock to the door. Tightening torque 25 Nm.

2. If installed, disconnect the lock wiring connector.

3. Disconnect the lock release cable from the lock.

3. Disconnect the lock release cable from the lock.

Installation

4. Installation is carried out in reverse order.

[The original material is located on the website: «chevyman.ru»]

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Tahoe 2 and 3: Doors, locks and windows

Lock rod and outer handle of the composite cargo compartment door
Cargo Compartment Composite Door Lock Drive
Cargo Compartment Door Lock Handle
Upper cargo door hinge
Lower cargo door hinge

Upper cargo door lock
Middle door panel
Middle door hinges
Middle door latch
Cargo Compartment Floor Trim Plate

See similar articles on the topic of Chevrolet cars:
Replacing the inner handle of the front door lock actuator Chevrolet Aveo T300 (2012-2018)
Front side door lower molding Chevrolet Captiva 1 (2006-2018)
Replacing the inner handle of the front door lock actuator Chevrolet Cruze 1 (2008-2016)
Removal the lock cylinder and the outer handle of the front door Chevrolet Lacetti 1 (2002-2009)
Removal the lock, lock cylinder mechanism, outer and inner front door handles Chevrolet Lanos T150 (2002-2009)
Adjusting the front door lock Chevrolet Niva 1 (2002-2016)
Installation diagram of the central lock (sliding door) Chevrolet Lumina 1 (1989-1994)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet

Tahoe 2 and 3 (2000-2014)